Udel® P-3703 is a transparent, high flow grade of polysulfone intended for injection molding applications with thin walls or long flow lengths.
Common applicaitons include : Medical/Healthcare applications, Dedical devices, Surgical tools, Hospital goods, Dental tools & assorted applications, Plumbing components, Tubing, Valves & valve components, Food service applications, Microwave cookware, Electrical parts and Dairy equipment
Udel® P-3703 NT 11 is a high flow grade of polysulfone intended for injection molding applications with thin walls or long flow lengths. This grade has higher flow than Udel® P-1700 and a slightly greater tendency to stress crack in some aggressive environments. Udel® polysulfone (PSU) is a tough, rigid, high-strength thermoplastic that maintains its properties at temperatures from -101 °C to 149 °C ( -150 °F to 300 °F). The heat deflection temperature at 1.8 MPa (264 psi) is 174 °C (345 °F) For most purposes this resin is suitable for continuous use up to 300 °F (149 °C). The material is resistant to oxidation and hydrolysis and withstands prolonged exposure to high temperatures and repeated sterilization. Udel® polysulfone is highly resistant to mineral acids, alkali and salt solutions. The resistance to detergents and hydrocarbon oils is good, but it will be attacked by polar solvents such as ketones, chlorinated hydrocarbons and aromatic hydrocarbons. Electrical properties of Udel® polysulfones are stable over a wide temperature range and after immersion in water or exposure to high humidity.
|ResMart Grade||Premium Branded|
|ASTM D638 Tensile Elongation||50 to 100 %|
|ASTM D570 Water Absorption||0.30 %|
|Manufacturer||Solvay Specialty Polymers|
|ASTM D792 Specific Gravity||1.24|
|ASTM D1238 Melt Flow Rate||17 g/10 min|
|ASTM D638 Tensile Strength||70.3 MPa|
|ASTM D790 Flexural Modulus||2690 MPa|
|ASTM D790 Flexural Strength||106 MPa|