ResMart Ultra ABS 7

ResMart Ultra ABS 7

ResMart Ultra ABS 7

High impact injection molding grade ABS thermoplastic resin.
SKU #: F06UL0005

The ABS three monomer system can be tailored to yield a good balance of properties. Basically, styrene contributes ease of processing characteristics, acrylonitrile imparts chemical resistance and increased surface hardness, and the butadiene contributes impact strength and overall toughness. ABBS is considered the best of the styrenic family.

It is hard, tough and rigid. Glass-reinforced ABS has improved properties over the non-reinforced resin. This advantage opens a wide range of high performance opportunities, particularly in applications requiring high strengths, rigidity and dimensional stability. ABS is severely attacked by some solvents. Prolonged exposure to aromatic solvents, ketones and esters should be avoided. This poor resistance to solvents does allow solvent bonding as a means of assembly.


  • Dimensional stability
  • Toughness — even at low temperatures
  • Chemical resistance


  • Poor weatherability
  • Poor solvent resistance
  • High smoke generation when burned
ResMart Grade Ultra
FDA Compliant Yes
RoHS Compliant Yes
SKU F06UL0005
Weight 1.000000
Manufacturer ResMart
ASTM D792   Specific Gravity 1.04
ASTM D1238 Melt Flow Rate 25.0 g/10 min
ASTM D638   Tensile Strength 5,880 psi
ASTM D790   Flexural Modulus 284,000 psi
ASTM D790   Flexural Strength 8,100 psi
ASTM D256   Notched Izod Impact 0.125” 6.6 ft-lb/in
ASTM D648   HDT (264 psi) 183 °F
SDS (62.98 kB)
Data Sheet (80.07 kB)