Udel P-1700 NT 11

Udel P-1700 NT 11

Udel P-1700 NT 11

Udel® P-1700 NT 11 is an injection molding grade of polysulfone. The material comes in pellet form and is transparent with a slight yellow color.


Common applications include : Medical/Healthcare applications, Medical devices, Surgical tools, Hospital goods, Dental tools & assorted applications, Plumbing components, Tubing, Valves & valve components, Food service applications, Microwave cookware, Electrical parts and Dairy equipment

SKU #: F90NA0001

Udel® P-1700 polysulfone (PSU) is a tough, rigid, high-strength thermoplastic suitable for continuous use up to 300 °F (149 °C). It is resistant to oxidation and hydrolysis and withstands prolonged exposure to high temperatures and repeated sterilization. Udel® P-1700 polysulfone is highly resistant to mineral acids, alkali and salt solutions. This resin is also highly resistant to degradation by gamma or electron beam radiation. Electrical properties of Udel® P-1700 polysulfone are stable over a wide temperature range and after immersion in water or exposure to high humidity.


Udel P-1700 complies with FDA 21 CFR 177.1655 and may be used in articles intended for repeated use in contact with foods. Additionally, this material is approved by the NSF, by the Department of Agriculture for contact with meat and poultry and by the 3-A Sanitary Standards of the Dairy Association.


This material is available in pellet form that can be used with standard plastic processing equipment. The material pellets are transparent with a slight yellow in appearance. 


Agency Approvals:

  • ISO 10993 Healthcare biocompatible
  • FDA 21 CFR 177.1655
  • NSF STD 51 - Maximum Temperature of Use: 149°C (300°F)
  • NSF STD 61 - Tested at 82 °C (180 °F) (Commercial Hot)

Automotive Approvals:

  • ASTM D6394 SP0112
  • BMW GS 93016


ResMart Grade Premium Branded
ASTM D638   Tensile Elongation 50 to 100 %
FDA Compliant Yes
RoHS Compliant Yes
ASTM D570   Water Absorption 0.30 %
SKU F90NA0001
Weight 1.000000
Manufacturer Solvay (Syensqo)
ASTM D792   Specific Gravity 1.24
ASTM D1238 Melt Flow Rate 6.5 g/10 min
ASTM D638   Tensile Strength 70.3 MPa
ASTM D790   Flexural Modulus 2690 MPa
ASTM D790   Flexural Strength 106 MPa
SDS (287.11 kB)
Data Sheet (225.48 kB)